UNIRAIL TW – EN 50306-2 300 V – type M Table TW1 - dimensional data Item n° Cross-section [mm²] Conductor n° wires x wire diameter [mm] Diameter [mm] RM006(1) 0,34 19x0,15 1,15÷1,31 RM001 0,5 19x0,18 1,15÷1,45 RM002 0,75 37x0,16 1,35÷1,65 RM003 1 37x0,18(2) 1,40÷1,80 RM004 1,5 37x0,23(2) 1,90÷2,30 RM005 2,5 37x0,30(2) 2,45÷2,85 TECHNICAL DATA Temperature rating up to and including 105°C Very low temperatures resistance (-40°C) Resistance to ozone, oils, acids and alkali Bending radius: refer to EN 50343 table 16 Range of approval: According to table TW1 (cross-section 0,5 ÷ 2,5 mm²) of EN 50306-2 for cables rated 300V (see IMQ test certificate) and HITACHI specification 211NW50282B CONSTRUCTION Conductor: tinned copper conductor according to table TW1 Insulation: double layer of special compound Marking: UNIKA (Italy) – EN 50306-2 300V cross-section M – WW/YYYY - traceability code Fire safety: hazard level HL3 according to Standard EN 45545-2 for indoor cables (EL1A) and outdoor cables (EL1B) Add the following letter after the item number for colours different from white G: yellow/green Y: grey B: blue R: red W: brown K: black V: greengreen Note (1): out of the scope of the standard Single core cable UNIKA (Italy) - EN 50306-2 300 V 1 M - code Note (2): conductors with 19 wires are allowed The characteristics of the products, described in the data sheet, do not constitute any contractual binding. UNIKA spa reserves the right to change the specifications without any notice. Partial or total reproduction of this document is forbidden. TDS 00/2025 Unless otherwise specified, all values are nominal, other values can be provided on request. The images are made for the sole purpose of illustrating the product and are purely indicative. 43 UNIKA - ROLLING STOCK CABLES - UNIRAIL TW – EN 50306-2 300 V – type M
RkJQdWJsaXNoZXIy NDUyMzc=